Sprite 1984

home *** CD-ROM | disk | FTP | other *** search

/ Sprite 1984 - 1993 / Sprite 1984 - 1993.iso / src / cmds / cc / sprite / tm-i386.h < prev next >

Wrap

C/C++ Source or Header | 1990-09-09 | 39.6 KB | 1,086 lines

/* Definitions of target machine for GNU compiler for Intel 80386. Copyright (C) 1988 Free Software Foundation, Inc. This file is part of GNU CC. GNU CC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 1, or (at your option) any later version. GNU CC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GNU CC; see the file COPYING. If not, write to the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */ /* Note that some other tm- files include this one and then override many of the definitions that relate to assembler syntax. */ /* Names to predefine in the preprocessor for this target machine. */ /* the file tm-compaq.h includes this file */ #define I386 1 /* Run-time compilation parameters selecting different hardware subsets. */ extern int target_flags; /* Macros used in the machine description to test the flags. */ /* Compile 80387 insns for floating point (not library calls). */ #define TARGET_80387 (target_flags & 1) /* Compile using ret insn that pops args. This will not work unless you use prototypes at least for all functions that can take varying numbers of args. */ #define TARGET_RTD (target_flags & 8) /* Compile passing first two args in regs 0 and 1. This exists only to test compiler features that will be needed for RISC chips. It is not usable and is not intended to be usable on this cpu. */ #define TARGET_REGPARM (target_flags & 020) /* Macro to define tables used to set the flags. This is a list in braces of pairs in braces, each pair being { "NAME", VALUE } where VALUE is the bits to set or minus the bits to clear. An empty string NAME is used to identify the default VALUE. */ #define TARGET_SWITCHES \ { { "80387", 1}, \ { "soft-float", -1}, \ { "rtd", 8}, \ { "nortd", -8}, \ { "regparm", 020}, \ { "noregparm", -020}, \ { "sym", 0 }, \ { "symm", 0 }, \ { "", TARGET_DEFAULT}} /* TARGET_DEFAULT is defined in tm-compaq.h, etc. */ /* target machine storage layout */ /* Define this if most significant byte of a word is the lowest numbered. */ /* That is true on the 80386. */ /* #define BITS_BIG_ENDIAN */ /* Define this if most significant byte of a word is the lowest numbered. */ /* That is not true on the 80386. */ /* #define BYTES_BIG_ENDIAN */ /* Define this if most significant word of a multiword number is numbered. */ /* Not true for 80386 */ /* #define WORDS_BIG_ENDIAN */ /* number of bits in an addressible storage unit */ #define BITS_PER_UNIT 8 /* Width in bits of a "word", which is the contents of a machine register. Note that this is not necessarily the width of data type `int'; if using 16-bit ints on a 80386, this would still be 32. But on a machine with 16-bit registers, this would be 16. */ #define BITS_PER_WORD 32 /* Width of a word, in units (bytes). */ #define UNITS_PER_WORD 4 /* Width in bits of a pointer. See also the macro `Pmode' defined below. */ #define POINTER_SIZE 32 /* Allocation boundary (in *bits*) for storing pointers in memory. */ #define POINTER_BOUNDARY 32 /* Allocation boundary (in *bits*) for storing arguments in argument list. */ #define PARM_BOUNDARY 32 /* Boundary (in *bits*) on which stack pointer should be aligned. */ #define STACK_BOUNDARY 32 /* Allocation boundary (in *bits*) for the code of a function. */ #define FUNCTION_BOUNDARY 32 /* Alignment of field after `int : 0' in a structure. */ #define EMPTY_FIELD_BOUNDARY 32 /* There is no point aligning anything to a rounder boundary than this. */ /* Some structures in the ATT libraries are assumed to round up from 16 to 18 bytes, for example the _io_buf */ #define BIGGEST_ALIGNMENT 32 /* Define this if move instructions will actually fail to work when given unaligned data. */ /* #define STRICT_ALIGNMENT */ /* Standard register usage. */ /* Number of actual hardware registers. The hardware registers are assigned numbers for the compiler from 0 to just below FIRST_PSEUDO_REGISTER. All registers that the compiler knows about must be given numbers, even those that are not normally considered general registers. In the 80387 we give the 8 general purpose registers the numbers 0-7, we assign 6 numbers for floating point registers 8-13, Note that registers 0-7 can be accessed as a short or int, while only 0-3 may be used with mov byte instructions. */ #define FIRST_PSEUDO_REGISTER 10 /* 1 for registers that have pervasive standard uses and are not available for the register allocator. On the 80386, only the stack pointer is such. */ #define FIXED_REGISTERS \ /*ax,ad,ac,ab,si,di,bp,sp,fval,fp0*/ \ { 0, 0, 0, 0, 0, 0, 0, 1, 1, 0} /* ;;change-wfs */ /* 1 for registers not available across function calls. These must include the FIXED_REGISTERS and also any registers that can be used without being saved. The latter must include the registers where values are returned and the register where structure-value addresses are passed. Aside from that, you can include as many other registers as you like. */ #define CALL_USED_REGISTERS \ /*ax,ad,ac,ab,si,di,bp,sp,*/ \ { 1, 1, 1, 0, 0, 0, 0, 1, \ 1, 1} /* Return number of consecutive hard regs needed starting at reg REGNO to hold something of mode MODE. This is ordinarily the length in words of a value of mode MODE but can be less for certain modes in special long registers. Actually there are no two word move instructions for consecutive registers. And only registers 0-3 may have mov byte instructions applied to them. */ #define HARD_REGNO_NREGS(REGNO, MODE) \ ((REGNO) >= 8 ? 1 \ : ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)) /* Value is 1 if hard register REGNO can hold a value of machine-mode MODE. On the 80386, the first 4 cpu registers can hold any mode. While the floating point registers may hold SFmode or DFmode only. */ #define HARD_REGNO_MODE_OK(REGNO, MODE) \ hard_regno_mode_ok(REGNO,MODE) /* Value is 1 if it is a good idea to tie two pseudo registers when one has mode MODE1 and one has mode MODE2. If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2, for any hard reg, then this must be 0 for correct output. */ #define MODES_TIEABLE_P(MODE1, MODE2) ((MODE1) == (MODE2)) /* Specify the registers used for certain standard purposes. The values of these macros are register numbers. */ /* on the 386 the pc register is %eip, and is not usable as a general register. The ordinary mov instructions won't work */ /* #define PC_REGNUM */ /* Register to use for pushing function arguments. */ #define STACK_POINTER_REGNUM 7 /* Base register for access to local variables of the function. */ #define FRAME_POINTER_REGNUM 6 /* First floating point reg */ #define FIRST_FLOAT_REG 8 /* Value should be nonzero if functions must have frame pointers. Zero means the frame pointer need not be set up (and parms may be accessed via the stack pointer) in functions that seem suitable. This is computed in `reload', in reload1.c. */ #define FRAME_POINTER_REQUIRED 0 /* Base register for access to arguments of the function. */ #define ARG_POINTER_REGNUM 6 /* Register in which static-chain is passed to a function. */ #define STATIC_CHAIN_REGNUM 2 /* Register in which address to store a structure value arrives in the function. On the 386, the prologue copies this from the stack to register %eax. */ #define STRUCT_VALUE_INCOMING \ gen_rtx (MEM, Pmode, gen_rtx (PLUS, Pmode, frame_pointer_rtx, \ gen_rtx (CONST_INT, VOIDmode, 8))) /* Place in which caller passes the structure value address. Actually, all that matters about this value is it its rtx_code: MEM means push the value on the stack like an argument. */ #define STRUCT_VALUE \ gen_rtx (MEM, Pmode, gen_rtx (PRE_DEC, Pmode, stack_pointer_rtx)) /* Define the classes of registers for register constraints in the machine description. Also define ranges of constants. One of the classes must always be named ALL_REGS and include all hard regs. If there is more than one class, another class must be named NO_REGS and contain no registers. The name GENERAL_REGS must be the name of a class (or an alias for another name such as ALL_REGS). This is the class of registers that is allowed by "g" or "r" in a register constraint. Also, registers outside this class are allocated only when instructions express preferences for them. The classes must be numbered in nondecreasing order; that is, a larger-numbered class must never be contained completely in a smaller-numbered class. For any two classes, it is very desirable that there be another class that represents their union. */ enum reg_class { NO_REGS, AREG, DREG, ADREG, CREG, BREG, Q_REGS, SIREG, DIREG, INDEX_REGS, GENERAL_REGS, FLOAT_REGS, ALL_REGS, LIM_REG_CLASSES }; #define N_REG_CLASSES (int) LIM_REG_CLASSES /* Give names of register classes as strings for dump file. */ #define REG_CLASS_NAMES \ { "NO_REGS", "AREG", "DREG", "ADREG", "CREG", "BREG","Q_REGS", \ "SIREG", "DIREG", \ "INDEX_REGS", "GENERAL_REGS", "FLOAT_REGS", "ALL_REGS"} /* Define which registers fit in which classes. This is an initializer for a vector of HARD_REG_SET of length N_REG_CLASSES. */ #define REG_CLASS_CONTENTS {0, 0x1, 0x2, 0x3, 0x4, 0x8, 0xf,\ 0x10, 0x20, 0x7f, 0xff, 0x300, 0x3ff} /* The same information, inverted: Return the class number of the smallest class containing reg number REGNO. This could be a conditional expression or could index an array. */ #define REGNO_REG_CLASS(REGNO) \ ((REGNO) == 0 ? AREG : \ (REGNO) == 1 ? DREG : \ (REGNO) == 2 ? CREG : \ (REGNO) == 3 ? BREG : \ (REGNO) == 4 ? SIREG : \ (REGNO) == 5 ? DIREG : \ (REGNO) == 7 ? GENERAL_REGS : \ (REGNO) < 8 ? INDEX_REGS : \ FLOAT_REGS) #define NON_QI_REG_P(X) \ (REG_P (X) && REGNO (X) >= 4 && REGNO (X) < FIRST_PSEUDO_REGISTER) #define FP_REG_P(X) (REG_P (X) && FP_REGNO_P (REGNO (X))) #define FP_REGNO_P(n) ((n) >= FIRST_FLOAT_REG && (n) < FIRST_PSEUDO_REGISTER) /* Try to maintain the accuracy of the death notes for regs satisfying the following. Important for stack like regs, to know when to pop. */ #define PRESERVE_DEATH_INFO_REGNO_P(x) FP_REGNO_P(x) /* 1 if register REGNO can magically overlap other regs. Note that nonzero values work only in very special circumstances. We return 1 for an FP reg because "both" our FP regs are really the same reg. */ #define OVERLAPPING_REGNO_P(REGNO) FP_REGNO_P (REGNO) /* The class value for index registers, and the one for base regs. */ #define INDEX_REG_CLASS INDEX_REGS #define BASE_REG_CLASS GENERAL_REGS /* Get reg_class from a letter such as appears in the machine description. */ #define REG_CLASS_FROM_LETTER(C) \ ((C) == 'r' ? GENERAL_REGS : \ (C) == 'q' ? Q_REGS : \ (C) == 'f' ? FLOAT_REGS : \ (C) == 'a' ? AREG : (C) == 'b' ? BREG : \ (C) == 'c' ? CREG : (C) == 'd' ? DREG : \ (C) == 'A' ? ADREG : \ (C) == 'S' ? SIREG : \ (C) == 'D' ? DIREG : NO_REGS) /* The letters I, J, K, L and M in a register constraint string can be used to stand for particular ranges of immediate operands. This macro defines what the ranges are. C is the letter, and VALUE is a constant value. Return 1 if VALUE is in the range specified by C. I is for the maximum shifts. */ #define CONST_OK_FOR_LETTER_P(VALUE, C) \ ((C) == 'I' ? (VALUE) >= 0 && (VALUE) <= 31 :0) /* Similar, but for floating constants, and defining letters G and H. Here VALUE is the CONST_DOUBLE rtx itself. */ #define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) \ ((C) == 'G' ? ! (TARGET_80387 && standard_80387_constant_p (VALUE)) : 1) /* Given an rtx X being reloaded into a reg required to be in class CLASS, return the class of reg to actually use. In general this is just CLASS; but on some machines in some cases it is preferable to use a more restrictive class. On the 80386 series, we prevent floating constants from being reloaded into floating registers (since no move-insn can do that) and we ensure that QImodes aren't reloaded into the esi or edi reg. */ #define PREFERRED_RELOAD_CLASS(X,CLASS) \ (GET_CODE (X) == CONST_DOUBLE \ ? ((CLASS) == GENERAL_REGS || (CLASS) == ALL_REGS \ ? GENERAL_REGS : NO_REGS) \ : GET_MODE (X) == QImode \ ? ((CLASS) == GENERAL_REGS || (CLASS) == ALL_REGS \ ? Q_REGS \ : (CLASS) == INDEX_REGS ? (abort (), INDEX_REGS) \ : (CLASS)) \ : (CLASS)) /* Return the maximum number of consecutive registers needed to represent mode MODE in a register of class CLASS. */ /* On the 80386, this is the size of MODE in words, except in the FP regs, where a single reg is always enough. */ #define CLASS_MAX_NREGS(CLASS, MODE) \ ((CLASS) == FLOAT_REGS ? 1 : \ ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)) /* Stack layout; function entry, exit and calling. */ /* Define this if pushing a word on the stack makes the stack pointer a smaller address. */ #define STACK_GROWS_DOWNWARD /* Define this if the nominal address of the stack frame is at the high-address end of the local variables; that is, each additional local variable allocated goes at a more negative offset in the frame. */ #define FRAME_GROWS_DOWNWARD /* Offset within stack frame to start allocating local variables at. If FRAME_GROWS_DOWNWARD, this is the offset to the END of the first local allocated. Otherwise, it is the offset to the BEGINNING of the first local allocated. */ #define STARTING_FRAME_OFFSET 0 /* If we generate an insn to push BYTES bytes, this says how many the stack pointer really advances by. On 386 pushw decrements by exactly 2 no matter what the position was. On the 386 there is no pushb; we use pushw instead, and this has the effect of rounding up to 2. */ #define PUSH_ROUNDING(BYTES) (((BYTES) + 1) & (-2)) /* Offset of first parameter from the argument pointer register value. */ #define FIRST_PARM_OFFSET(FNDECL) 8 /* Value is 1 if returning from a function call automatically pops the arguments described by the number-of-args field in the call. FUNTYPE is the data type of the function (as a tree), or for a library call it is an identifier node for the subroutine name. On the 80386, the RTD insn may be used to pop them if the number of args is fixed, but if the number is variable then the caller must pop them all. RTD can't be used for library calls now because the library is compiled with the Unix compiler. Use of RTD is a selectable option, since it is incompatible with standard Unix calling sequences. If the option is not selected, the caller must always pop the args. */ #define RETURN_POPS_ARGS(FUNTYPE) \ (TARGET_RTD && TREE_CODE (FUNTYPE) != IDENTIFIER_NODE \ && (TYPE_ARG_TYPES (FUNTYPE) == 0 \ || TREE_VALUE (tree_last (TYPE_ARG_TYPES (FUNTYPE))) == void_type_node)) #define FUNCTION_VALUE(VALTYPE, FUNC) \ gen_rtx (REG, TYPE_MODE (VALTYPE), \ VALUE_REGNO(TYPE_MODE(VALTYPE))) /* Define how to find the value returned by a library function assuming the value has mode MODE. */ #define LIBCALL_VALUE(MODE) \ gen_rtx (REG, MODE, VALUE_REGNO(MODE)) /* 1 if N is a possible register number for function argument passing. On the 80386, no registers are used in this way. *NOTE* -mregparm does not work. It exists only to test register calling conventions. */ #define FUNCTION_ARG_REGNO_P(N) 0 /* Define a data type for recording info about an argument list during the scan of that argument list. This data type should hold all necessary information about the function itself and about the args processed so far, enough to enable macros such as FUNCTION_ARG to determine where the next arg should go. On the 80386, this is a single integer, which is a number of bytes of arguments scanned so far. */ #define CUMULATIVE_ARGS int /* Initialize a variable CUM of type CUMULATIVE_ARGS for a call to a function whose data type is FNTYPE. For a library call, FNTYPE is 0. On the 80386, the offset starts at 0. */ #define INIT_CUMULATIVE_ARGS(CUM,FNTYPE) \ ((CUM) = 0) /* Update the data in CUM to advance over an argument of mode MODE and data type TYPE. (TYPE is null for libcalls where that information may not be available.) */ #define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \ ((CUM) += ((MODE) != BLKmode \ ? (GET_MODE_SIZE (MODE) + 3) & ~3 \ : (int_size_in_bytes (TYPE) + 3) & ~3)) /* Define where to put the arguments to a function. Value is zero to push the argument on the stack, or a hard register in which to store the argument. MODE is the argument's machine mode. TYPE is the data type of the argument (as a tree). This is null for libcalls where that information may not be available. CUM is a variable of type CUMULATIVE_ARGS which gives info about the preceding args and about the function being called. NAMED is nonzero if this argument is a named parameter (otherwise it is an extra parameter matching an ellipsis). */ /* On the 80386 all args are pushed, except if -mregparm is specified then the first two words of arguments are passed in EAX, EDX. *NOTE* -mregparm does not work. It exists only to test register calling conventions. */ #define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \ ((TARGET_REGPARM && (CUM) < 8) ? gen_rtx (REG, (MODE), (CUM) / 4) : 0) /* For an arg passed partly in registers and partly in memory, this is the number of registers used. For args passed entirely in registers or entirely in memory, zero. */ #define FUNCTION_ARG_PARTIAL_NREGS(CUM, MODE, TYPE, NAMED) \ ((TARGET_REGPARM && (CUM) < 8 \ && 8 < ((CUM) + ((MODE) == BLKmode \ ? int_size_in_bytes (TYPE) \ : GET_MODE_SIZE (MODE)))) \ ? 2 - (CUM) / 4 : 0) /* This macro generates the assembly code for function entry. FILE is a stdio stream to output the code to. SIZE is an int: how many units of temporary storage to allocate. Refer to the array `regs_ever_live' to determine which registers to save; `regs_ever_live[I]' is nonzero if register number I is ever used in the function. This macro is responsible for knowing which registers should not be saved even if used. */ #define FUNCTION_PROLOGUE(FILE, SIZE) \ function_prologue (FILE, SIZE) /* Output assembler code to FILE to increment profiler label # LABELNO for profiling a function entry. */ #define FUNCTION_PROFILER(FILE, LABELNO) \ fprintf (FILE, "\tmovl $%sP%d,%%edx\n\tcall _mcount\n", LPREFIX, (LABELNO)); /* EXIT_IGNORE_STACK should be nonzero if, when returning from a function, the stack pointer does not matter. The value is tested only in functions that have frame pointers. No definition is equivalent to always zero. */ /* Note on the 386 it might be more efficient not to define this since we have to restore it ourselves from the frame pointer, in order to use pop */ #define EXIT_IGNORE_STACK 1 /* This macro generates the assembly code for function exit, on machines that need it. If FUNCTION_EPILOGUE is not defined then individual return instructions are generated for each return statement. Args are same as for FUNCTION_PROLOGUE. The function epilogue should not depend on the current stack pointer! It should use the frame pointer only. This is mandatory because of alloca; we also take advantage of it to omit stack adjustments before returning. */ #define FUNCTION_EPILOGUE(FILE, SIZE) \ function_epilogue (FILE, SIZE) /* If the memory address ADDR is relative to the frame pointer, correct it to be relative to the stack pointer instead. This is for when we don't use a frame pointer. ADDR should be a variable name. */ #define FIX_FRAME_POINTER_ADDRESS(ADDR,DEPTH) \ { int offset = -1; \ rtx regs = stack_pointer_rtx; \ if (ADDR == frame_pointer_rtx) \ offset = 0; \ else if (GET_CODE (ADDR) == PLUS && XEXP (ADDR, 0) == frame_pointer_rtx \ && GET_CODE (XEXP (ADDR, 1)) == CONST_INT) \ offset = INTVAL (XEXP (ADDR, 1)); \ else if (GET_CODE (ADDR) == PLUS && XEXP (ADDR, 0) == frame_pointer_rtx) \ { rtx other_reg = XEXP (ADDR, 1); \ offset = 0; \ regs = gen_rtx (PLUS, Pmode, stack_pointer_rtx, other_reg); } \ else if (GET_CODE (ADDR) == PLUS && XEXP (ADDR, 1) == frame_pointer_rtx) \ { rtx other_reg = XEXP (ADDR, 0); \ offset = 0; \ regs = gen_rtx (PLUS, Pmode, stack_pointer_rtx, other_reg); } \ else if (GET_CODE (ADDR) == PLUS \ && GET_CODE (XEXP (ADDR, 0)) == PLUS \ && XEXP (XEXP (ADDR, 0), 0) == frame_pointer_rtx \ && GET_CODE (XEXP (ADDR, 1)) == CONST_INT) \ { rtx other_reg = XEXP (XEXP (ADDR, 0), 1); \ offset = INTVAL (XEXP (ADDR, 1)); \ regs = gen_rtx (PLUS, Pmode, stack_pointer_rtx, other_reg); } \ else if (GET_CODE (ADDR) == PLUS \ && GET_CODE (XEXP (ADDR, 0)) == PLUS \ && XEXP (XEXP (ADDR, 0), 1) == frame_pointer_rtx \ && GET_CODE (XEXP (ADDR, 1)) == CONST_INT) \ { rtx other_reg = XEXP (XEXP (ADDR, 0), 0); \ offset = INTVAL (XEXP (ADDR, 1)); \ regs = gen_rtx (PLUS, Pmode, stack_pointer_rtx, other_reg); } \ if (offset >= 0) \ { int regno; \ extern char call_used_regs[]; \ for (regno = FIRST_FLOAT_REG; regno < FIRST_PSEUDO_REGISTER; regno++)\ if (regs_ever_live[regno] && ! call_used_regs[regno]) \ offset += 8; \ for (regno=0 ; regno <FIRST_FLOAT_REG ; regno++) \ if (regs_ever_live[regno] && ! call_used_regs[regno]) \ offset += 4; \ offset -= 4; \ ADDR = plus_constant (regs, offset + (DEPTH)); } } \ /* Addressing modes, and classification of registers for them. */ /* #define HAVE_POST_INCREMENT */ /* #define HAVE_POST_DECREMENT */ /* #define HAVE_PRE_DECREMENT */ /* #define HAVE_PRE_INCREMENT */ /* Macros to check register numbers against specific register classes. */ /* These assume that REGNO is a hard or pseudo reg number. They give nonzero only if REGNO is a hard reg of the suitable class or a pseudo reg currently allocated to a suitable hard reg. Since they use reg_renumber, they are safe only once reg_renumber has been allocated, which happens in local-alloc.c. */ #define REGNO_OK_FOR_INDEX_P(REGNO) \ ((REGNO) < STACK_POINTER_REGNUM || (unsigned) reg_renumber[REGNO] < STACK_POINTER_REGNUM) #define REGNO_OK_FOR_BASE_P(REGNO) \ ((REGNO) <= STACK_POINTER_REGNUM || (unsigned) reg_renumber[REGNO] <= STACK_POINTER_REGNUM) #define REGNO_OK_FOR_SIREG_P(REGNO) ((REGNO) == 4 || reg_renumber[REGNO] == 4) #define REGNO_OK_FOR_DIREG_P(REGNO) ((REGNO) == 5 || reg_renumber[REGNO] == 5) /* The macros REG_OK_FOR..._P assume that the arg is a REG rtx and check its validity for a certain class. We have two alternate definitions for each of them. The usual definition accepts all pseudo regs; the other rejects them unless they have been allocated suitable hard regs. The symbol REG_OK_STRICT causes the latter definition to be used. Most source files want to accept pseudo regs in the hope that they will get allocated to the class that the insn wants them to be in. Source files for reload pass need to be strict. After reload, it makes no difference, since pseudo regs have been eliminated by then. */ #ifndef REG_OK_STRICT /* Nonzero if X is a hard reg that can be used as an index or if it is a pseudo reg. */ #define REG_OK_FOR_INDEX_P(X) (REGNO (X) < STACK_POINTER_REGNUM || REGNO (X) >= FIRST_PSEUDO_REGISTER) /* Nonzero if X is a hard reg that can be used as a base reg of if it is a pseudo reg. */ /* ?wfs */ #define REG_OK_FOR_BASE_P(X) (REGNO (X) <= STACK_POINTER_REGNUM || REGNO(X) >= FIRST_PSEUDO_REGISTER) #define REG_OK_FOR_STRREG_P(X) \ (REGNO (X) == 4 || REGNO (X) == 5 || REGNO (X) >= FIRST_PSEUDO_REGISTER) #else /* Nonzero if X is a hard reg that can be used as an index. */ #define REG_OK_FOR_INDEX_P(X) REGNO_OK_FOR_INDEX_P (REGNO (X)) /* Nonzero if X is a hard reg that can be used as a base reg. */ #define REG_OK_FOR_BASE_P(X) REGNO_OK_FOR_BASE_P (REGNO (X)) #define REG_OK_FOR_STRREG_P(X) \ (REGNO_OK_FOR_DIREG_P (REGNO (X)) || REGNO_OK_FOR_SIREG_P (REGNO (X))) #endif /* GO_IF_LEGITIMATE_ADDRESS recognizes an RTL expression that is a valid memory address for an instruction. The MODE argument is the machine mode for the MEM expression that wants to use this address. The other macros defined here are used only in GO_IF_LEGITIMATE_ADDRESS, except for CONSTANT_ADDRESS_P which is usually machine-independent. */ #define MAX_REGS_PER_ADDRESS 2 #define CONSTANT_ADDRESS_P(X) CONSTANT_P (X) /* Nonzero if the constant value X is a legitimate general operand. It is given that X satisfies CONSTANT_P or is a CONST_DOUBLE. */ #define LEGITIMATE_CONSTANT_P(X) 1 #define GO_IF_INDEXABLE_BASE(X, ADDR) \ if (GET_CODE (X) == REG && REG_OK_FOR_BASE_P (X)) goto ADDR #define LEGITIMATE_INDEX_REG_P(X) \ (GET_CODE (X) == REG && REG_OK_FOR_INDEX_P (X)) /* Return 1 if X is an index or an index times a scale. */ #define LEGITIMATE_INDEX_P(X) \ (LEGITIMATE_INDEX_REG_P (X) \ || (GET_CODE (X) == MULT \ && LEGITIMATE_INDEX_REG_P (XEXP (X, 0)) \ && GET_CODE (XEXP (X, 1)) == CONST_INT \ && (INTVAL (XEXP (X, 1)) == 2 \ || INTVAL (XEXP (X, 1)) == 4 \ || INTVAL (XEXP (X, 1)) == 8))) /* Go to ADDR if X is an index term, a base reg, or a sum of those. */ #define GO_IF_INDEXING(X, ADDR) \ { if (LEGITIMATE_INDEX_P (X)) goto ADDR; \ GO_IF_INDEXABLE_BASE (X, ADDR); \ if (GET_CODE (X) == PLUS && LEGITIMATE_INDEX_P (XEXP (X, 0))) \ { GO_IF_INDEXABLE_BASE (XEXP (X, 1), ADDR); } \ if (GET_CODE (X) == PLUS && LEGITIMATE_INDEX_P (XEXP (X, 1))) \ { GO_IF_INDEXABLE_BASE (XEXP (X, 0), ADDR); } } /* We used to allow this, but it isn't ever used. || ((GET_CODE (X) == POST_DEC || GET_CODE (X) == POST_INC) \ && REG_P (XEXP (X, 0)) \ && REG_OK_FOR_STRREG_P (XEXP (X, 0))) \ */ #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \ { if (CONSTANT_ADDRESS_P (X)) goto ADDR; \ GO_IF_INDEXING (X, ADDR); \ if (GET_CODE (X) == PLUS) \ { if (CONSTANT_ADDRESS_P (XEXP (X, 1))) \ GO_IF_INDEXING (XEXP (X, 0), ADDR); \ if (CONSTANT_ADDRESS_P (XEXP (X, 0))) \ GO_IF_INDEXING (XEXP (X, 1), ADDR); } } /* Try machine-dependent ways of modifying an illegitimate address to be legitimate. If we find one, return the new, valid address. This macro is used in only one place: `memory_address' in explow.c. OLDX is the address as it was before break_out_memory_refs was called. In some cases it is useful to look at this to decide what needs to be done. MODE and WIN are passed so that this macro can use GO_IF_LEGITIMATE_ADDRESS. It is always safe for this macro to do nothing. It exists to recognize opportunities to optimize the output. For the 80386, we handle X+REG by loading X into a register R and using R+REG. R will go in a general reg and indexing will be used. However, if REG is a broken-out memory address or multiplication, nothing needs to be done because REG can certainly go in a general reg. */ #define LEGITIMIZE_ADDRESS(X,OLDX,MODE,WIN) \ { register int ch = (X) != (OLDX); \ if (GET_CODE (X) == PLUS) \ { if (GET_CODE (XEXP (X, 0)) == MULT) \ ch = 1, XEXP (X, 0) = force_operand (XEXP (X, 0), 0); \ if (GET_CODE (XEXP (X, 1)) == MULT) \ ch = 1, XEXP (X, 1) = force_operand (XEXP (X, 1), 0); \ if (ch && GET_CODE (XEXP (X, 1)) == REG \ && GET_CODE (XEXP (X, 0)) == REG) \ return X; \ if (ch) { GO_IF_LEGITIMATE_ADDRESS (MODE, X, WIN); } \ if (GET_CODE (XEXP (X, 0)) == REG \ || (GET_CODE (XEXP (X, 0)) == SIGN_EXTEND \ && GET_CODE (XEXP (XEXP (X, 0), 0)) == REG \ && GET_MODE (XEXP (XEXP (X, 0), 0)) == HImode)) \ { register rtx temp = gen_reg_rtx (Pmode); \ register rtx val = force_operand (XEXP (X, 1), temp); \ if (val != temp) emit_move_insn (temp, val, 0); \ XEXP (X, 1) = temp; \ return X; } \ else if (GET_CODE (XEXP (X, 1)) == REG \ || (GET_CODE (XEXP (X, 1)) == SIGN_EXTEND \ && GET_CODE (XEXP (XEXP (X, 1), 0)) == REG \ && GET_MODE (XEXP (XEXP (X, 1), 0)) == HImode)) \ { register rtx temp = gen_reg_rtx (Pmode); \ register rtx val = force_operand (XEXP (X, 0), temp); \ if (val != temp) emit_move_insn (temp, val, 0); \ XEXP (X, 0) = temp; \ return X; }}} /* Go to LABEL if ADDR (a legitimate address expression) has an effect that depends on the machine mode it is used for. On the 80386, only postdecrement and postincrement address depend thus (the amount of decrement or increment being the length of the operand). */ #define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL) \ if (GET_CODE (ADDR) == POST_INC || GET_CODE (ADDR) == POST_DEC) goto LABEL /* Specify the machine mode that this machine uses for the index in the tablejump instruction. */ #define CASE_VECTOR_MODE Pmode /* Define this if the tablejump instruction expects the table to contain offsets from the address of the table. Do not define this if the table should contain absolute addresses. */ /* #define CASE_VECTOR_PC_RELATIVE */ /* Specify the tree operation to be used to convert reals to integers. This should be changed to take advantage of fist --wfs ?? */ #define IMPLICIT_FIX_EXPR FIX_ROUND_EXPR /* This is the kind of divide that is easiest to do in the general case. */ #define EASY_DIV_EXPR TRUNC_DIV_EXPR /* Define this as 1 if `char' should by default be signed; else as 0. */ #define DEFAULT_SIGNED_CHAR 1 /* Max number of bytes we can move from memory to memory in one reasonably fast instruction. */ #define MOVE_MAX 4 /* Define this if zero-extension is slow (more than one real instruction). */ /* #define SLOW_ZERO_EXTEND */ /* Nonzero if access to memory by bytes is slow and undesirable. */ #define SLOW_BYTE_ACCESS 0 /* Define if shifts truncate the shift count which implies one can omit a sign-extension or zero-extension of a shift count. */ #define SHIFT_COUNT_TRUNCATED /* Value is 1 if truncating an integer of INPREC bits to OUTPREC bits is done just by pretending it is already truncated. */ #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1 /* We assume that the store-condition-codes instructions store 0 for false and some other value for true. This is the value stored for true. */ #define STORE_FLAG_VALUE 1 /* When a prototype says `char' or `short', really pass an `int'. (The 386 can't easily push less than an int.) */ #define PROMOTE_PROTOTYPES /* Specify the machine mode that pointers have. After generation of rtl, the compiler makes no further distinction between pointers and any other objects of this machine mode. */ #define Pmode SImode /* A function address in a call instruction is a byte address (for indexing purposes) so give the MEM rtx a byte's mode. */ #define FUNCTION_MODE QImode /* Define this if addresses of constant functions shouldn't be put through pseudo regs where they can be cse'd. Desirable on the 386 because a CALL with a constant address is not much slower than one with a register address. */ #define NO_FUNCTION_CSE /* Compute the cost of computing a constant rtl expression RTX whose rtx-code is CODE. The body of this macro is a portion of a switch statement. If the code is computed here, return it with a return statement. Otherwise, break from the switch. */ #define CONST_COSTS(RTX,CODE) \ case CONST_INT: \ if (RTX == const0_rtx) return 0; \ if ((unsigned) INTVAL (RTX) < 077) return 1; \ case CONST: \ case LABEL_REF: \ case SYMBOL_REF: \ return 3; \ case CONST_DOUBLE: \ return 5; \ case PLUS: \ if (GET_CODE (XEXP (RTX, 0)) == REG \ && GET_CODE (XEXP (RTX, 1)) == CONST_INT) \ return 2; /* Tell final.c how to eliminate redundant test instructions. */ /* ??? Find a better place to put this. */ #if 0 #define FINAL_PRESCAN_INSN(INSN, OPERANDS, NOPERANDS) \ fp_hook (INSN, OPERANDS, NOPERANDS) #endif /* Here we define machine-dependent flags and fields in cc_status (see `conditions.h'). */ /* Set if the cc value is actually in the 80387, so a floating point conditional branch must be output. */ #define CC_IN_80387 04000 /* Store in cc_status the expressions that the condition codes will describe after execution of an instruction whose pattern is EXP. Do not alter them if the instruction would not alter the cc's. */ #define NOTICE_UPDATE_CC(EXP, INSN) \ notice_update_cc((EXP)) /* Output a signed jump insn. Use template NORMAL ordinarily, or FLOAT following a floating point comparison. Use NO_OV following an arithmetic insn that set the cc's before a test insn that was deleted. NO_OV may be zero, meaning final should reinsert the test insn because the jump cannot be handled properly without it. */ #define OUTPUT_JUMP(NORMAL, FLOAT, NO_OV) \ { \ if (cc_status.flags & CC_IN_80387) \ return FLOAT; \ if (cc_status.flags & CC_NO_OVERFLOW) \ return NO_OV; \ return NORMAL; \ } /* Control the assembler format that we output. */ #ifdef ATT #include <syms.h> #else #define FILNMLEN 14 #endif /* How to refer to registers in assembler output. This sequence is indexed by compiler's hard-register-number (see above). */ /* In order to refer to the first 8 regs as 32 bit regs prefix an "e" For non floating point regs, the following are the HImode names. */ #define HI_REGISTER_NAMES \ {"ax","dx","cx","bx","si","di","bp","sp", \ "st","st(1)"} /* ,"st(2)","st(3)","st(4)","st(5)" } */ #define REGISTER_NAMES HI_REGISTER_NAMES /* Note we are omitting these since currently I don't know how to get gcc to use these, since they want the same but different number as al, and ax. */ /* note the last four are not really qi_registsers, but the md will have to never output movb into one of them only a movw . There is no movb into the hardware reg esi that I can find */ #define QI_REGISTER_NAMES \ {"al", "dl", "cl", "bl", "si", "di", "bp", "sp",} /* Don't know how to use these, yet. They overlap with ax,dx,cx,bx and so would clobber al,dl,cl,bl #define QI_REGISTER_NAMES_TOP \ {"ah", \ "dh", \ "ch", \ "bh", } */ /* How to renumber registers for dbxand gdb. */ /* {0,2,1,3,6,7,4,5,12,13,14,15,16,17} */ #define DBX_REGISTER_NUMBER(n) \ ((n)==0?0 :(n)==1?2 :(n)==2?1 :(n)==3?3 :(n)==4?6 :(n)==5?7 :(n)==6?4 :(n)==7?5 :(n)==8?12 :(n)==9?12 :(n)) /* This is how to output the definition of a user-level label named NAME, such as the label on a static function or variable NAME. */ #define ASM_OUTPUT_LABEL(FILE,NAME) \ (assemble_name (FILE, NAME), fputs (":\n", FILE)) /* This is how to output an assembler line defining a `double' constant. */ #define ASM_OUTPUT_DOUBLE(FILE,VALUE) \ fprintf (FILE, "%s%.22e\n",ASM_DOUBLE, (VALUE)) /* This is how to output an assembler line defining a `float' constant. */ #define ASM_OUTPUT_FLOAT(FILE,VALUE) \ do { union { float f; long l;} tem; \ tem.f = (VALUE); \ fputs(ASM_LONG,FILE); \ fprintf((FILE), "0x%x\n", tem.l); \ } while (0) /* Store in OUTPUT a string (made with alloca) containing an assembler-name for a local static variable named NAME. LABELNO is an integer which is different for each call. */ #define ASM_FORMAT_PRIVATE_NAME(OUTPUT, NAME, LABELNO) \ ( (OUTPUT) = (char *) alloca (strlen ((NAME)) + 10), \ sprintf ((OUTPUT), "%s.%d", (NAME), (LABELNO))) /* This is how to output an assembler line defining an `int' constant. */ #define ASM_OUTPUT_INT(FILE,VALUE) \ ( fprintf (FILE,ASM_LONG), \ output_addr_const (FILE,(VALUE)), \ putc('\n',FILE)) /* Likewise for `char' and `short' constants. */ /* is this supposed to do align too?? */ #define ASM_OUTPUT_SHORT(FILE,VALUE) \ ( fprintf (FILE,ASM_SHORT), \ output_addr_const (FILE,(VALUE)), \ putc('\n',FILE)) /* #define ASM_OUTPUT_SHORT(FILE,VALUE) \ ( fputs (ASM_BYTE,FILE), \ output_addr_const (FILE,(VALUE)), \ fputs ( ",",FILE), \ output_addr_const (FILE,(VALUE)), \ fputs (" >> 8\n",FILE)) */ #define ASM_OUTPUT_CHAR(FILE,VALUE) \ ( fprintf (FILE, ASM_BYTE), \ output_addr_const (FILE,(VALUE)), \ putc('\n',FILE)) /* This is how to output an assembler line for a numeric constant byte. */ #define ASM_OUTPUT_BYTE(FILE,VALUE) \ fprintf ((FILE), "%s0x%x\n", ASM_BYTE, (VALUE)) /* This is how to output an insn to push a register on the stack. It need not be very fast code. */ #define ASM_OUTPUT_REG_PUSH(FILE,REGNO) \ fprintf (FILE, "\tpushl e%s\n", reg_names[REGNO]) /* This is how to output an insn to pop a register from the stack. It need not be very fast code. */ #define ASM_OUTPUT_REG_POP(FILE,REGNO) \ fprintf (FILE, "\tpopl e%s\n", reg_names[REGNO]) /* This is how to output an element of a case-vector that is absolute. */ #define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \ fprintf (FILE, "%s%s%d\n",ASM_LONG,LPREFIX, VALUE) /* This is how to output an element of a case-vector that is relative. We don't use these on the 386 yet, because the ATT assembler can't do forward reference the differences. */ #define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, VALUE, REL) abort(); \ fprintf (FILE, "\t.word %s%d-%s%d\n",LPREFIX, VALUE,LPREFIX, REL) /* Define the parentheses used to group arithmetic operations in assembler code. */ #define ASM_OPEN_PAREN "" #define ASM_CLOSE_PAREN "" /* Define results of standard character escape sequences. */ #define TARGET_BELL 007 #define TARGET_BS 010 #define TARGET_TAB 011 #define TARGET_NEWLINE 012 #define TARGET_VT 013 #define TARGET_FF 014 #define TARGET_CR 015 /* Print operand X (an rtx) in assembler syntax to file FILE. CODE is a letter or dot (`z' in `%z0') or 0 if no letter was specified. The CODE z takes the size of operand from the following digit, and outputs b,w,or l respectively. On the 80386, we use several such letters: f -- float insn (print a CONST_DOUBLE as a float rather than in hex). L,W,B,Q,S -- print the opcode suffix for specified size of operand. R -- print the prefix for register names. z -- print the opcode suffix for the size of the current operand. * -- print a star (in certain assembler syntax) w -- print the operand as if it's a "word" (HImode) even if it isn't. w -- print the operand as if it's a byte (QImode) even if it isn't. c -- don't print special prefixes before constant operands. */ #define PRINT_OPERAND_PUNCT_VALID_P(CODE) \ ((CODE) == '*') #define PRINT_OPERAND(FILE, X, CODE) \ print_operand (FILE, X, CODE) #define PRINT_OPERAND_ADDRESS(FILE, ADDR) \ print_operand_address (FILE, ADDR) /* Routines in gnulib that return floats must return them in an fp reg, just as other functions do which return such values. These macros make that happen. */ #define SFVALUE float #define INTIFY(FLOATVAL) FLOATVAL /* Nonzero if INSN magically clobbers register REGNO. */ #define INSN_CLOBBERS_REGNO_P(INSN, REGNO) \ (FP_REGNO_P (REGNO) \ && (GET_CODE (INSN) == JUMP_INSN || GET_CODE (INSN) == BARRIER)) /* a letter which is not needed by the normal asm syntax, which we can use for operand syntax in the extended asm */ #define ASM_OPERAND_LETTER '#' /* Local variables: version-control: t End: */